Report this message as spam or having improper contents
Thank you for reporting improper contents. Reported messages will normally be checked manually within 24 hours. To avoid misuse of this forum by programmed robots, we have to ask for the characters in the picture below.
RE: Timothy E Laraway
kdx52 said 2010-01-17 20:31
you need to take the carb off remove the float bowl. there is a main jet and a slow jet. remove the slow jet. a slow is is small brass tube with holes in it. it is about 1/2 to 3/4 inch long. it is supposed to be hollow. when it is clogged your bike will not idle. if it is clogged I have used a piece of copper wire to loosen debris. Sometimes it is difficult because the hole is so small. the wire I use is a strand from a wire in an extention cord. good luck.