Report this message as spam or having improper contents
Thank you for reporting improper contents. Reported messages will normally be checked manually within 24 hours. To avoid misuse of this forum by programmed robots, we have to ask for the characters in the picture below.
´92 EVO cam replacement
frustrated said 2009-07-25 23:42
I´m told by HD to install the cam while motor is at TDC-compression stroke. My concern is the timing mark on the pinion gear is way out at 4 o´clock, far away from aligning with the cam gear and oil breather gear. I had rotated the pinion to get everything to line up, but when I ran the motor oil gushed from the top of the push rod covers.