Report this message as spam or having improper contents
Thank you for reporting improper contents. Reported messages will normally be checked manually within 24 hours. To avoid misuse of this forum by programmed robots, we have to ask for the characters in the picture below.
Turn Signals
Nolan said 2008-09-08 03:14
Hi,
I recently bought a 81 CB 400 as my first street bike. The battery was dead and I just replaced it. The electric start worked perfectly and the bike fired right up. The turn signals didn´t work and I knew that when I bought the bike and I thought I´d tinker around. So there are two wires coming out from the box with the turn signal/horn/light switches enclosed and they were just clipped together. I pulled them apart and plugged them into the two prongs at the end of the clutch. I pressed the start button and all the dash lights just dimmed, so I switched the wires (I now it´s a bad idea now) all the dash lights were still on and everything seemed normal, so I pressed the start button and all the lights turned off, and since then the start button won´t work even though I put the wires back to the way they were. Checked the 3 fuses on the left side of the bike and they were all fine. I´m lost. Any suggestions?