Report this message as spam or having improper contents
Thank you for reporting improper contents. Reported messages will normally be checked manually within 24 hours. To avoid misuse of this forum by programmed robots, we have to ask for the characters in the picture below.
Wire getting really hot?
Geerhed said 2007-08-16 17:55
I have been chasing down a non-charging issue. Replaced the battery, regulator, and finally the rotor (I know you should replace all parts at the same time, but this was before I was aware of that issue). Anyway, the rotor seems to have done it - above 3000 RPM there is lots of voltage going to the battery. However, when the charging system kicks in, the Red/White wire from the regulator to the connector on the starter solenoid/main fuse gets REALLY hot. I took the connector apart, cleaned all the connections, and it´s still getting really hot. Suggestions?