Report this message as spam or having improper contents
Thank you for reporting improper contents. Reported messages will normally be checked manually within 24 hours. To avoid misuse of this forum by programmed robots, we have to ask for the characters in the picture below.
RE: 2007 Dyna Wide Glide
thebadbigwolf said 2021-06-27 00:09
Hello to all you fellow Wide Glide enthusiast. I am curious to know if anybody else has had concerns how about the handling under acceleration in a sharp turn or just it’s going through the gears. My 2007 wide glide EFI seems unstable or wishy-washy While accelerating into the turn or just running through the gears each time I shift into another gear I feel a twist in the frame in reference to the rear wheel. Personally I feel it is a poor design with the swingarm attached to the transmission which in turn is rubber mounted to the frame.I did some research and came up with a set of stabilizers through a company named Sputhe, if you look on the website they got a set of stabilizers which are not cheap but I’m hoping will fix the issue that I’m having. I’ve modified by 96 to a 103 with high compression 10.5/1 wiesco pistons, ported the hedge installed a 2 inch intake valve. I also put a new R&R cam plate with screaming eagle cams. 595 left 260 duration. Along with that I put a fueling high volume high pressure oil pump in any custom two into one exhaust.Last but not least I removed the fuel injection and replaced it with a Mikuni 48 carburetor. Also remove the drive belt and replaced it with a chain and sprocket. So you see I’m serious about performance I would like any input you might have .