Report this message as spam or having improper contents
Thank you for reporting improper contents. Reported messages will normally be checked manually within 24 hours. To avoid misuse of this forum by programmed robots, we have to ask for the characters in the picture below.
Problems starting
Shane freeman said 2020-08-28 23:47
I bought a 01 gsx 750 f katana about 2 weeks ago that had been sitting for about 2 yrs. The guy rolled it out and choked it and it started right up but would only run with choke on. So i know enough about motorcycles to know that meant the carbs definately needed cleaning. My local dhop only works on 2010 or later so i decided to fo it myself. Long story short ive gotten it running, poorly but running and it was still overloading cylinder causeing a backfire when giving it throttle. I took off carbs and cleaned more thoroughly and adjusted flost level to correct level and it started and ran almost perfectly for an around the block test ride. When i shut it off, the floats hund again and totally filled all 4 cylinders and air box with fuel. So i removed carbs again and cleaned and lubed everything checked to make sure the floats were opening and closing and reinstalled now it wont start. Any ideas whats wrong