RE: hard start

KTM Enduro 600 discussion forum:


RE: hard start

RE: hard start 
Greg F. said 2002-04-28 16:06 
 
These bikes are notorious hard starters. I got the process down pretty well for my bike.Try this with yours.
1) Be sure you are trying to start the bike when it´s on the top of the compression stroke and engage the compression release.
2) Check is the "hot start" switch on the carb(the round knob on the left side of carb)My lc4 wouldn´t start with the switch engaged when cold.
3) Use full choke when the bike´s cold.
4) Don´t give the bike any throttle when starting either.
Mine sat all winter and started on the third kick.This was just from alot of trial and error.If you´re not getting any fuel on the plug after forty kicks it sounds like a jetting problem.The combustion chamber should be getting fuel with every kick.Forty kicks should at least flood the bike.Good luck! 
 
<<Previous          Answer          Discussion overview          Report spam          Next>>

Comments, questions and answersEnter a comment or answer to this message

You can post your question, answer or comment as a guest. Or enter your e-mail to join the forum and get notifcations of new messages.

 
Title 		 
Signature
Optional e-mail
Enter your e-mail to join the forum and get notification of answers and new messages. You can unsubscribe with a single click. Bikez does not display, sell or misuse e-mail addresses.
Message text

Describe technical issues in detail to get quality answers. You can offer or request second-hand parts and equipment as a privat person. Bikez reserves the right to remove any improper or commercial content.
Accept that we store and display the message.