Turn Signals

Honda CB 400 discussion forum:


Turn Signals

Turn Signals 
Nolan said 2008-09-08 03:14 
 
Hi,

I recently bought a 81 CB 400 as my first street bike. The battery was dead and I just replaced it. The electric start worked perfectly and the bike fired right up. The turn signals didn´t work and I knew that when I bought the bike and I thought I´d tinker around. So there are two wires coming out from the box with the turn signal/horn/light switches enclosed and they were just clipped together. I pulled them apart and plugged them into the two prongs at the end of the clutch. I pressed the start button and all the dash lights just dimmed, so I switched the wires (I now it´s a bad idea now) all the dash lights were still on and everything seemed normal, so I pressed the start button and all the lights turned off, and since then the start button won´t work even though I put the wires back to the way they were. Checked the 3 fuses on the left side of the bike and they were all fine. I´m lost. Any suggestions? 
 
<<Previous          Answer          Discussion overview          Report spam          Next>>

Comments, questions and answersEnter a comment or answer to this message

You can post your question, answer or comment as a guest. Or enter your e-mail to join the forum and get notifcations of new messages.

 
Title 		 
Signature
Optional e-mail
Enter your e-mail to join the forum and get notification of answers and new messages. You can unsubscribe with a single click. Bikez does not display, sell or misuse e-mail addresses.
Message text

Describe technical issues in detail to get quality answers. You can offer or request second-hand parts and equipment as a privat person. Bikez reserves the right to remove any improper or commercial content.
Accept that we store and display the message.