Report this message as spam or having improper contents
Thank you for reporting improper contents. Reported messages will normally be checked manually within 24 hours. To avoid misuse of this forum by programmed robots, we have to ask for the characters in the picture below.
RE: Just curious
bill boyd said 2011-04-02 07:43
BORE WILL RUN around 4 to 600 dollars using je pistons stroking the crank will b about 1000 cylinder bore will b bout 4 to 600....i had langcourt in auburn alabama do my cylinders.there is only 2 places n us that does the electro-nickel plating on the cylinders.the other place is somewhere out west. i live in ms. so lang court was closer,so i drove it there.coution:they make a 802 or 803 bore piston kit.(J.E.)STAY AWAY!!!! CYLINDER WALLS WILL B 2 THIN!!!! 793 WAS AWSOME with NO PROBLEMS!!!! A.P.E. RACING WILL STROKE THE CRANK. THEH R LOCATED IN CALIFORNIA I THINK. 4mm over is rec. unless ur gonna go big with the 9mm billet crank. last i checked i think that was bout 2200 dollars....also if u do all that u will need race carbs. i rec. kehin race 39mm throttle body downdraft carbs. mukuni r cheaper but u get what u pay for. carbs will b 1700 to 1900 dollars....also u will need rods.i rec.carillo rods h beam.they will run 1100 to 1300. anymore questions email me at billboyd32@yahoo.com ps my 97 750 now has a busa motor on it!!!! what a ride!!!!!!!!!!!!!!