Report this message as spam or having improper contents
Thank you for reporting improper contents. Reported messages will normally be checked manually within 24 hours. To avoid misuse of this forum by programmed robots, we have to ask for the characters in the picture below.
RE: leaky lowrider
Greif said 2012-11-05 11:42
I am guessing that you are leaking from the main shift coming from the transmission. If so there is a main shaft oil seal part # 37741-82 and then there is according to the parts book a seal that belongs to the primary housing that has a part number of 12018. The oil seal for the main shaft does not require that the transmission is taken off the bike it can be replaced very simply with a screw driver however, always use a rubber mallet and a piece of pipe the same diameter as the seal.
I always find that sometimes the bike has some 1984 parts. I believe this has to do with the month the bike was built at least in my case. So, the primary housing might have a part number of 12052.